Welcome Backer!

Thank you for bringing tinyLiDAR to life – we couldn’t have done it without you.

Although we didn’t quite reach our second funding goal of $25K, we thought it was close enough so we decided to send all of our backers the promised “bracket” board useful to mount three tinyLiDARs for the “Follow-Me 2” sketch.

It’s kind of a universal board so you can use it in any way you like. We used it as shown below for mounting three of the tinyLiDAR sensors with the provided M2 x 10 screws. We then wired them up with grove cables to an Arduino UNO and used the updated Follow-Me 2 sketch provided in the link below. It’s easiest to mount the board to the servo platform with double sided tape or hot melt glue. Enjoy!